Thin, comfortable latex hood chlorinated
Latex hood with large eye and mouth opening
Latex hood made of thin, stretchy latex with comfortable large openings for the eyes and mouth. With this latex hood, you will radiate bizarre lust and sensuality. Slip into a different role and experience uninhibited anonymous adventures.
The eyes and mouth of this latex hood are not edged. This makes it particularly comfortable to wear.
This hood is always supplied without a zip but complete with our chlorination. This treatment guarantees a particularly erotic wearing experience.
This chlorination creates a smooth, silky-soft surface. This latex hood can be put on in seconds without the annoying zip. No sticking to the hair or face makes it easy to adjust the position until it fits perfectly. The latex hood is silky smooth and can be polished to a high gloss on the outside.
Following sizes are available: 1 Inch – 2.54 cm
- Mask: XS collar fits from 29-32 cm / head circumference: 50-53 cm
- Mask : S collar fits from 32-35 cm / head circumference: 53-55 cm
- Mask : M collar fits from 35-39 cm / head circumference: 55-58 cm
- Mask : L collar fits from 39-44 cm / head circumference: 58-62 cm
Fit and Size:
The model wears size XS
Measures Model:
- Head circumference:53 cm
- Neck circumference: 33 cm
Photo: HHL-Fotograf
Chlorination of latex clothing
Experience the awesome wearing comfort of our latex clothing by choosing the chlorinated version. Chlorination has nothing done with the shiny surface of the material.
Advantages are simple and clear:
Quick dressing without aid
Chlorination makes the surface smooth and silky. The latex slides on your skin and can be put on without any aid like silicone oil or talcum powder. Therefore chlorinated latex is especially suitable for clothes that are very large and laborous to put on - for example latex catsuits. The effect unfortunately disappears if the skin is clammy or if the skin was previously creamed.
No sticking-together
The latex clothing does neither stick together in the wet state nor in the dry state. This can spare your nerves and faciliate the handling. It is possible to polish the clothes in a tumble dryer using cold air and a soft towel. A basic shininess will appear. Despite this fact, a deep action care with silicone oil is strongly recommended.
Suitable for allergy sufferer:
Via chlorination latex can be conditioned to be suitable for allergy sufferer or to be more suitable than unchlorinated latex. This can be explained with the deterioration of the allergenic protein that is encased in the latex.
Increased life period
Untreated latex features so-called double bonds among the carbon backbone of the material. These bonds can be recognized as "docking site" for radicals which can strongly damage latex or decrease the longevity. During chlorination up to 70% of these double bonds are removed and the chemical durability of your rubber is increased.
But there are also a few disatvantages:
Repairs difficult / impossible
The biggest disadvantage: Only thick latex garments can be sometimes repaired in a satisfactory way by the „grinding method“.
Change of haptics
The material becomes thougher and stiffer. At the beginning the effect can be clearly felt, but over time and by wearing the material it will become softer. Due to the changed haptics the material appears to be of higher thickness than comparable, untreated rubber. A thin catsuit made of 0.25 mm latex will be perceived like a catsuit made of 0.35 mm latex.
Size charts for latex clothing
The size charts given here are intended as a guide to help you choose the right size for your latex clothing. All sizes are in cm! For information and conversion for our customers with other units of length: 1 inch = 2.54 cm.
Hoods
| Head circumference in cm | 50 ‐ 53 cm | 53 ‐ 55 cm | 55 ‐ 58 cm | 58 ‐ 62 cm |
| Neck circumference in cm | 29 ‐ 32 cm | 32 ‐ 35 cm | 35 ‐ 39 cm | 39 ‐ 44 cm |
| Size | X-SMALL | SMALL | MEDIUM | LARGE - XL |