Men's latex jeans with pockets

This very elaborately crafted pair of latex trousers in a jean style will convince you in every way. Get to know the completely redesigned cut of our latex jeans. Pleasing wearing comfort and functionality will certainly delight you with this model. The loose yet close-fitting cut in the leg area guarantees you a perfect figure in our men's latex jeans, as they are specially optimized for men. * With extra leg length, which can be shortened if necessary.

Our latex jeans are completely suitable for everyday wear thanks to the detailed processing and the visually appealing cut. Thanks to the fully functional pockets, these latex trousers have space for a smart phone, keys, wallet or other small and important things that need to stay close at hand.

All of the pockets are double edged. At the corners, these are additionally reinforced from the inside with rubberized textile tape and rivets.

The latex jeans are made of 0.40-0.50 mm material thickness. The waistband and the belt loops are made of 1.5 - 2.0 mm material. Double edging, pasted seams and rivets, and inlaid textile reinforcements provide robust durability.

ATTENTION: shortened trousers cannot be exchanged!

For even more comfort and an elegant matt look, order the latex jeans in our chlorinated version.

Cut to fit Latex Jeans in lenght

Our Latex Jeans are made with a maximum length of 34. The length can quickly and easily be trimmed to your desired length.

Instructions:

Try on your Latex Jeans and wear them for about 5 minutes. Go through a range of regular motion such as bending over and sitting down.
Mark only with a pencil where the latex jeans should be trimmed. Perhaps try on the shoes you plan to wear most often with these latex jeans. Sneakers and high heels can make a slight difference. If in doubt, leave the trouser leg longer and trim a second time.
Lay the jeans on a flat surface and measure from the end of the leg to your mark. Transfer this measurement to the other leg and draw a straight line.
Cut along this line with a sharp pair of scissors. Please only use a pair of sharp scissors, never use a Stanley knife or any other kind of tool. Either a pair of sharp scissors or a sharp rolling knife with a hard surface is suitable for trimming latex.

If you are unsure about how your scissors will perform when cutting latex, try a test cut below your mark.

You can also bring your trousers to a shop where clothing alterations are made. You can have the alterations made for just a small fee within one or two minutes.

Shown latex Jean:

Color: Black
Material thickness: 0.40 - 0.50 mm
Pockets: Front and rear pockets

Fit and dimensions:

The model wears size Medium and has the following measurements:

Body height: 185 cm
Waist: 86 cm
Buttocks: 96 cm

Chlorination of latex clothing

Experience the awesome wearing comfort of our latex clothing by choosing the chlorinated version. Chlorination has nothing done with the shiny surface of the material.

Advantages are simple and clear:

Quick dressing without aid

Chlorination makes the surface smooth and silky. The latex slides on your skin and can be put on without any aid like silicone oil or talcum powder. Therefore chlorinated latex is especially suitable for clothes that are very large and laborous to put on - for example latex catsuits. The effect unfortunately disappears if the skin is clammy or if the skin was previously creamed.

No sticking-together

The latex clothing does neither stick together in the wet state nor in the dry state. This can spare your nerves and faciliate the handling. It is possible to polish the clothes in a tumble dryer using cold air and a soft towel. A basic shininess will appear. Despite this fact, a deep action care with silicone oil is strongly recommended.

Suitable for allergy sufferer:

Via chlorination latex can be conditioned to be suitable for allergy sufferer or to be more suitable than unchlorinated latex. This can be explained with the deterioration of the allergenic protein that is encased in the latex.

Increased life period

Untreated latex features so-called double bonds among the carbon backbone of the material. These bonds can be recognized as "docking site" for radicals which can strongly damage latex or decrease the longevity. During chlorination up to 70% of these double bonds are removed and the chemical durability of your rubber is increased.

But there are also a few disatvantages:

Repairs difficult / impossible
The biggest disadvantage: Only thick latex garments can be sometimes repaired in a satisfactory way by the „grinding method“.

Change of haptics

The material becomes thougher and stiffer. At the beginning the effect can be clearly felt, but over time and by wearing the material it will become softer. Due to the changed haptics the material appears to be of higher thickness than comparable, untreated rubber. A thin catsuit made of 0.25 mm latex will be perceived like a catsuit made of 0.35 mm latex.

Information about the Basic Line

Preferential price - % compared to the standard model
*14-day exchange guarantee

Enjoy latex clothing simply and easily. We've all been there - when you've decided to buy new latex clothing to add to your latex wardrobe, you want to be sure that it fits. That's exactly what the Basic Line collection from Simon O. is for, which can offer you this security thanks to the 14-day *exchange guarantee.

Your latest piece of latex fashion will be sent to you in neutral packaging. Simply unpack and enjoy your new latex clothing. You will receive unrestricted handmade Simon O. quality from our manufactory. Available exclusively in black and without contrasting colours, the clothing from the Basic Line collection also offers you an interesting price advantage compared to the couture models as well as a 14-day *exchange guarantee if the size does not fit*.

* The exchange guarantee applies to all Basic Line garments that have not been worn - except for trying on - and do not show any signs of damage. We will be happy to exchange the delivered item for the same model in the next larger/smaller size. We ask for your understanding that we have to hygienically clean returned items in any case and charge EUR 19.00 for this - latex clothing is worn directly on the skin and therefore requires 100% cleanliness.

Size charts for latex clothing

The size charts given here are intended as a guide to help you choose the right size for your latex clothing. All sizes are in cm! For information and conversion for our customers with other units of length: 1 inch = 2.54 cm.

Men´s bottom

Men	XS-44	S-46	M-48	L-50	XL-52	XXL-54	XXXL-56-58
waist	70-75	75-81	81-87	87-92	92-98	98-105	105-115
buttocks	84-88	98-95	95-100	100-105	105-110	110-115	115-120
tigh	50-52	52-55	55-58	58-62	62-67	67-72	72-76

Tight Men's Latex Jeans

Add latex care